+
  • 1(1736492467251).jpg
  • 2(1736492467319).jpg

Product Description

Product Introduction                                                                                                

JD3080 is a new type of gasoline engine oil additive package which relies on the advanced formula and the newest agent developed by Sinopec Research Institute of Petroleum Processing (RIPP). It could achieve the balance between product performance and cost, and greatly reduce the cost of blended oil. It could be dissolved well in base oil of API I,II, A part of III and other synthetic oil.

Recommended Dosage

API Specification

Recommended Dosage  (w%)

SF

4.5

SG

5.0

SJ

7.0

SL

9.0

SM

11.0

 

Technical Specification

Item

Quality Index

Typical Data

Test Method

Kinematic Viscosity ( 100C), mm2/s

Report

50.99

GB/T265

Density  (20℃) g/cm3

0.9- 1. 1

0.9861

GB/T1884

Flash Point  (Open) /℃

≥ 200

224

GB/T3536

Element content,m%

Zn%

≥ 1.0

1.38

SH/T0226

N%

≥0.5

0.65

SH/T0224

P%

≥ 1.0

1.36

SH/T0296

Ca%

≥3.0

4.49

SH/T0297

 

Package/Product Storage/Transportation

Net weight: 200KG packed in 200L iron drum.

The maximum temperature should not exceed 70℃ for the storage, handling of the product and preparation of oil, for long-term storage, the maximum temperature should not exceed 45℃ .The product is non-flammable, non-explosive and non-corrosive. No special preventative measure is required during use, but general preventive measures in handling of chemicals shall be followed. If the oil splashes onto skin. detergent, soap and water can be used to wash it away thoroughly.

Related Products

High - viscosity PAO synthetic base oil

  Excellent high - temperature stability

Ultra-high viscosity PAO synthetic base oil

Excellent lubricity. Good thermal oxidation stability.

PAG water-soluble polyether

Reverse solubility, with the cloud point of its aqueous solution being approximately 50℃.

Water-insoluble PAG polyether

Insoluble in water but partially soluble in hydrocarbons.

Plant Workshop

factory5
factory4
factory3
factory2
factory

Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%
+
  • 1(1736492467251).jpg
  • 2(1736492467319).jpg

JD3080 Gasoline engine oil additive package

JD3080 is a new type of gasoline engine oil additive package which relies on the advanced formula and the newest agent developed by Sinopec Research Institute of Petroleum Processing (RIPP). 


Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%