Welcome to Henan J&D Chemical Co.,Ltd.
Product Description
Product Introduction
JD6032 is designed for ether ester type synthetic oil type (also known as super coolant) screw air compressor oil. It is made up of many kinds of special additives, which solves the problem of polyether easy to decompose by thermal oxidation and the problem of polyester easy to hydrolyze. It improves the antioxidant, anti-wear and anti-rust properties of synthetic oils, and the oils made from JD6032 can exceed the OEM standards of similar products.
Adding the recommended dosage of JD6031 to PAG / POE, the product's oil change intervals can reach 10,000-12,000 hours, and the compressor can be kept clean and free of carbon and sludge.
Recommended Dosage
|
Base oil type |
Recommended Dosage (W%) |
|
PAG / POE |
5.3 |
Technical Specification
|
Item |
Typical Data |
Test Method |
|
Appearance |
Yellowish to brown liquid |
Visual |
|
Kinematic Viscosity ( 40℃), mm2/s |
450-850 |
GB/T265 |
|
Flash Point (Open) /℃ |
>180 |
GB/T3536 |
|
Mechanical impurities |
- |
GB/T511 |
|
Water % |
- |
GB/T260 |
Package / Transportation / Storage
Package: 200L Drum.or IBC Tank. Suitable for container and land transportation.
Refer to SH/T0164 for storage, loading, unloading and oil adjustment. The maximum temperature should not exceed 75℃. For long-term storage, the maximum temperature should not exceed 45℃. This product is non-flammable, non-explosive, non-corrosive, in terms of safety, environmental protection, use and other aspects of general petroleum products, without special protection.
Related Products
Unsaturated Complex/ Polyolesters
High - viscosity PAO synthetic base oil
Plant Workshop
Get A Quote
* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible
JD6032 Ether and Polyester Base Air Compressor Oil Package
Classification: