+
  • 1(1736492135093).jpg
  • 2(1736492135131).jpg

Product Description

Product Introduction

JD8006 is a newly-developed, and it is blended from a variety of additives such as EP anti-wear additive, oiliness additive, anti-rust additive and efficient anti-oxidant, etc. The blended worm gear oil holds good performance such as EP anti-wear, anti-oxidant, and anti-rust, etc.

Recommended Dosage

Evenly mix the base oil of different viscosity under 60-70C

--- add dosage 1.5- 1.6% to blend L-CKE worm gear oil,

--- or add dosage 1.6- 1.8% to blend L-CKE/P worm gear oil.

Target Product

Recommended Dosage   %

L-CKE worm gear oil

1.5- 1.6

L-CKE/P worm gear oil

1.6- 1.8

Technical Specification

Item

Quality Index

Typical data

Test Method

Density (20℃)       g/cm3

0.90~ 1.2

1.050

GB/T 1884

Flash point (Opening)    ℃

≥ 100

106

GB/T 3536

Kinematic viscosity(40℃) mm2/s

Report

45.50

GB/T 265

Element content  m%

Phosphor Content         m%

≥ 1.5

1.79

SH/T 0296

Sulfur Content          m%

≥ 25

27.63

SH/T 0303

Package/Product Storage/Transportation

Net weight: 200kg/ galvanized drum.

Prevent from strong oxidant. The maximum temperature should not exceed 60℃ for the storage, handling of the product and preparation of oil; for long-term storage, the maximum temperature should not exceed 45 ℃. This product is not flammable, non explosive and non corrosive. No special preventative measure is required during use, but general preventive measures in handling of chemicals shall be followed. If the oil splashes onto skin, detergent, soap and water can be used to wash it away thoroughly.

Related Products

Unsaturated Complex/ Polyolesters

Product IntroductionThis product series comprises esters synthesized from oleic acid and polyols, characterized by excellent lubricity, biodegradability, good annealing cleanliness, outstanding high- and low-temperature performance, high flash point, and high fire point. They can be used either as a standalone base oil or blended with synthetic base oils, and are suitable for applications such as fire-resistant hydraulic fluids and metalworking oils. Technical SpecificationJ&D CodeKV40cstKV100cstVIITANmg KOH/gFP ℃PP ℃Hi-Ester U3046469.2187<1310-45Hi-Ester U30686612181<1320-40Hi-Ester U40686812.761900.2315-25Unsaturated Complex/ PolyolestersApplication scope and recommended dosage★ Fire-resistant Hydraulic Fluids:10–100%★ Metalworking Oils:10–60%Product Characteristics★ Excellent high-temperature detergency★ High flash point, low volatility★ Good low-temperature performance★ Good hydrolytic stability★ High thermal stability and oxidation stability★ BiodegradablePacking and transportationPacked in drums, net weight 190kg per drum.Store and transport as non-dangerous goods, keep in a cool, dry and ventilated place under tight seal.

TMA Ester

 Product IntroductionTrimellitic esters are produced by the reaction of trimellitic anhydride with monohydric or polyhydric alcohols. Characterized by a high flash point and low volatility, they are ideally suited for high-temperature applications, serving as base oils for high-temperature chain oils, air compressor oils, and high/low-temperature greases. Compatible with both PAO and high-quality mineral oils, they can also be utilized as base oils for various fully synthetic or semi-synthetic lubricants.Technical SpecificatioTMA Ester J&D CodeKV40 cstKV100 cstVIITAN mg KOH/gFlash Point ℃Pour Point℃Hi-Ester TM505281240.05282-45Hi-Ester TM10097111000.05275-39Hi-Ester TM12012011.89850.05268-30Hi-Ester TM14014313.1830.05280-30Hi-Ester TM32030620.2730.05276-9Application Scope and Recommended Dosage★ High-Temperature Chain Oil—Up to 98%                  ★ Engine  Oil—5-15%★ Air Compressor Oil—Up to 98%                                  ★ Industrial Gear Oil—Up to 98%★ High-/Low-Temperature  Grease—10-90%Product Features ★ Excellent high-temperature detergency      ★ High flash point, low volatility ★ Good low-temperature performance        ★ High demulsibility ★ High thermal stability and oxidation stability    ★ Biodegradable

High - viscosity PAO synthetic base oil

  Excellent high - temperature stability

Plant Workshop

factory5
factory4
factory3
factory2
factory

Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%
+
  • 1(1736492135093).jpg
  • 2(1736492135131).jpg

JD8006 Worm Gear Oil Additive Package

JD8006 is a newly-developed, and it is blended from a variety of additives such as EP anti-wear additive, oiliness additive, anti-rust additive and efficient anti-oxidant, etc. The blended worm gear oil holds good performance such as EP anti-wear, anti-oxidant, and anti-rust, etc.


Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%