+
  • 1(1736491372050).jpg
  • 2(1736491372015).jpg

Product Description

Product Introduction

JD8060 Automatic Transmission Fluid (ATF) Additive Package is a high quality ash-free additive specially designed to meet the specifications of General Motors DEXrON-VI and Ford Mercon ATF. It also meets the requirements of the Allison Transmission Division's C-4 specification and Caterpillar's TO-2 specification. It has excellent anti-wear, anti-oxidation properties, and excellent friction characteristics. With class II and above base oil and synthetic oil has strong adaptability, can be prepared to meet the Dexron-VI or Mercon/C-4 performance requirements and low temperature viscosity requirements of the transmission fluid.

Characteristic   

Excellent oxidation stability, thermal stability and cleanliness, prevent the formation of paint film sludge and carbon deposits.

Excellent friction characteristics, so that the vehicle has a good shift feeling.

Excellent defoaming to ensure the effective transmission of power.

Excellent low temperature fluidity and rubber sealing material adaptability, effectively protect the sealing material, prevent leakage.

Technical specifications

The product meets the requirements of below specifications:

  • GM Dexron-Ⅵ
  • Ford Mercon
  • Allison C-4
  • Caterpillar TO-2

Technical Specification

Item

Quality Index

Typical Date

Test Method

Density(20℃) /kg﹒g/cm3

0.9- 1. 1

0.9676

GB/T 1884

Kinematic Viscosity 40℃ mm2/s

report

98.94

GB/T 265

Flash point(Open)/℃

≥100

142

GB/T 3536

Element content  m%

Phosphorus  m%

≥1.5

3.22

SH/T 0296

Nitrogen  m%

≥0.5

0.86

SH/T 0224

 

Product Application

JD8060 is suitable for automotive automatic transmission, hydraulic transmission system.

JD8060is suitable for automatic transmission systems, power steering systems and other hydraulic systems of construction machinery.

 

Deployment Scheme (For reference)

5 speed transmission and below

4.0%

6- 9 speed transmission

5.5%

 

Deployment Scheme (For reference)

Component

Percent (%)

100N(Ⅲ类)

50

500N(Ⅲ类)

35.5

Diesters

5

PMA Viscosity Index Improvers

5

Pour Point Depressant

0.5

JD8060

4.0

 

Package/Product Storage/Transportation

Net weight 200kg/drum. 200L standard iron drum.

Refer to SH/T0164 for storage, handling and oil mixing. The maximum temperature should not exceed 60° C, and the maximum temperature should not exceed 45 ° C for long-term storage. This product is non-flammable, non-explosive and non-corrosive. In terms of safety, environmental protection, use and other aspects of general petroleum products, no special protection is required.

 

Related Products

Unsaturated Complex/ Polyolesters

Product IntroductionThis product series comprises esters synthesized from oleic acid and polyols, characterized by excellent lubricity, biodegradability, good annealing cleanliness, outstanding high- and low-temperature performance, high flash point, and high fire point. They can be used either as a standalone base oil or blended with synthetic base oils, and are suitable for applications such as fire-resistant hydraulic fluids and metalworking oils. Technical SpecificationJ&D CodeKV40cstKV100cstVIITANmg KOH/gFP ℃PP ℃Hi-Ester U3046469.2187<1310-45Hi-Ester U30686612181<1320-40Hi-Ester U40686812.761900.2315-25Unsaturated Complex/ PolyolestersApplication scope and recommended dosage★ Fire-resistant Hydraulic Fluids:10–100%★ Metalworking Oils:10–60%Product Characteristics★ Excellent high-temperature detergency★ High flash point, low volatility★ Good low-temperature performance★ Good hydrolytic stability★ High thermal stability and oxidation stability★ BiodegradablePacking and transportationPacked in drums, net weight 190kg per drum.Store and transport as non-dangerous goods, keep in a cool, dry and ventilated place under tight seal.

TMA Ester

 Product IntroductionTrimellitic esters are produced by the reaction of trimellitic anhydride with monohydric or polyhydric alcohols. Characterized by a high flash point and low volatility, they are ideally suited for high-temperature applications, serving as base oils for high-temperature chain oils, air compressor oils, and high/low-temperature greases. Compatible with both PAO and high-quality mineral oils, they can also be utilized as base oils for various fully synthetic or semi-synthetic lubricants.Technical SpecificatioTMA Ester J&D CodeKV40 cstKV100 cstVIITAN mg KOH/gFlash Point ℃Pour Point℃Hi-Ester TM505281240.05282-45Hi-Ester TM10097111000.05275-39Hi-Ester TM12012011.89850.05268-30Hi-Ester TM14014313.1830.05280-30Hi-Ester TM32030620.2730.05276-9Application Scope and Recommended Dosage★ High-Temperature Chain Oil—Up to 98%                  ★ Engine  Oil—5-15%★ Air Compressor Oil—Up to 98%                                  ★ Industrial Gear Oil—Up to 98%★ High-/Low-Temperature  Grease—10-90%Product Features ★ Excellent high-temperature detergency      ★ High flash point, low volatility ★ Good low-temperature performance        ★ High demulsibility ★ High thermal stability and oxidation stability    ★ Biodegradable

High - viscosity PAO synthetic base oil

  Excellent high - temperature stability

Plant Workshop

factory5
factory4
factory3
factory2
factory

Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%
+
  • 1(1736491372050).jpg
  • 2(1736491372015).jpg

JD8060 Automatic Transmission Fluid (ATF) Additive Package

JD8060 Automatic Transmission Fluid (ATF) Additive Package is a high quality ash-free additive specially designed to meet the specifications of General Motors DEXrON-VI and Ford Mercon ATF. It also meets the requirements of the Allison Transmission Division's C-4 specification and Caterpillar's TO-2 specification.


Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%