+
  • 1(1736493333327).jpg
  • 2(1736493333421).jpg

Product Description

Product Introduction

JD8901 is suitable for mineral oil and synthetic ester high temperature chain oils, which contains special high temperature resistant additives and has excellent thermal stability and low evaporation loss even under high temperature conditions of 200-300℃. The oil blended with this agent can reach the standard of imported similar products.

Adding the recommended dose of JD8901 to the suitable base oil, the high temperature chain oil can be formulated with very low carbon and coking tendency and can maintain liquid film lubrication, without producing harmful gases, eliminating the cleaning problems caused by solid accumulation and reducing the downtime, and helping to clean the chain contaminated by other poor chain lubricants.

Recommended Dosage

Product Type

Recommended Dosage w%

Pentaerythritol ester / Trimellitate

4.0

Mineral Oil / PAO / PIB + POE

3.0

Technical Specification

Item

Typical Data

Appearance

Yellow to reddish-brown liquid

Kinematic Viscosity (100℃) / mm2/s

20-60

Flash Point (COC) / ℃

>200

Water m %

-

Mechanical impurities %

-

Package / Transportation / Storage

Package: 200L Drum.or IBC Tank. Suitable for container and land transportation.

Refer to SH/T0164 for storage, loading, unloading and oil adjustment. The maximum temperature should not exceed 75℃. For long-term storage, the maximum temperature should not exceed 45℃. This product is non-flammable, non-explosive, non-corrosive, in terms of safety, environmental protection, use and other aspects of general petroleum products, without special protection.

Related Products

High - viscosity PAO synthetic base oil

  Excellent high - temperature stability

Ultra-high viscosity PAO synthetic base oil

Excellent lubricity. Good thermal oxidation stability.

PAG water-soluble polyether

Reverse solubility, with the cloud point of its aqueous solution being approximately 50℃.

Water-insoluble PAG polyether

Insoluble in water but partially soluble in hydrocarbons.

Plant Workshop

factory5
factory4
factory3
factory2
factory

Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%
+
  • 1(1736493333327).jpg
  • 2(1736493333421).jpg

JD8901 High Temperature Chain Oil Package

JD8901 is suitable for mineral oil and synthetic ester high temperature chain oils, which contains special high temperature resistant additives and has excellent thermal stability and low evaporation loss even under high temperature conditions of 200-300℃.


Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%