+
  • 1(1736815191913).jpg
  • 2(1736815192036).jpg

Product Description

Product Introduction

JDAO-535 refers to Thioether and Phenolic Ester Type Antioxidant, which is with low toxicity, can used to stabilize polymers and other organic materials which are prone to thermal degradation. This product is widely used in polyolefin, elastomers (EPDM), petroleum products and other applications. It also provides excellent anti-oxidation performance when combining with other additives under high temperature conditions, especially with amine antioxidant to control viscosity increase and reduce deposit formation effectively. This product is widely used in the formulation of premium engine oils, and also performs well in industrial oil applications. The recommended treat rate is 0. 1-0.5% (m%).

Technical Specification

Item

Index

Test Method

Appearance

White or mild yellow powdered crystal

Visual Inspection

Melting Point, °C

≥63.0

GB/T617

Ash Content, m%

≤0.3

GB/T508, ASTM D482

S Content, m%

4.5-5.5

SH/T0303, ASTM D1552

Package/Product Storage/Transportation

Packed in 25kg drums, or as required by customers.

This product is applicable to various modes of transportation. It is not appropriate for exposure or high temperature storage, stored in a cool,dry and ventilated place. The maximum storage temperature shall not exceed 45°C, and the shelf life is 2 years. This product is not flammable, explosive and corrosive, with no special protection required. In case of accidental contact with skin, wash it off thoroughly with water and detergents.

Related Products

Unsaturated Complex/ Polyolesters

Product IntroductionThis product series comprises esters synthesized from oleic acid and polyols, characterized by excellent lubricity, biodegradability, good annealing cleanliness, outstanding high- and low-temperature performance, high flash point, and high fire point. They can be used either as a standalone base oil or blended with synthetic base oils, and are suitable for applications such as fire-resistant hydraulic fluids and metalworking oils. Technical SpecificationJ&D CodeKV40cstKV100cstVIITANmg KOH/gFP ℃PP ℃Hi-Ester U3046469.2187<1310-45Hi-Ester U30686612181<1320-40Hi-Ester U40686812.761900.2315-25Unsaturated Complex/ PolyolestersApplication scope and recommended dosage★ Fire-resistant Hydraulic Fluids:10–100%★ Metalworking Oils:10–60%Product Characteristics★ Excellent high-temperature detergency★ High flash point, low volatility★ Good low-temperature performance★ Good hydrolytic stability★ High thermal stability and oxidation stability★ BiodegradablePacking and transportationPacked in drums, net weight 190kg per drum.Store and transport as non-dangerous goods, keep in a cool, dry and ventilated place under tight seal.

TMA Ester

 Product IntroductionTrimellitic esters are produced by the reaction of trimellitic anhydride with monohydric or polyhydric alcohols. Characterized by a high flash point and low volatility, they are ideally suited for high-temperature applications, serving as base oils for high-temperature chain oils, air compressor oils, and high/low-temperature greases. Compatible with both PAO and high-quality mineral oils, they can also be utilized as base oils for various fully synthetic or semi-synthetic lubricants.Technical SpecificatioTMA Ester J&D CodeKV40 cstKV100 cstVIITAN mg KOH/gFlash Point ℃Pour Point℃Hi-Ester TM505281240.05282-45Hi-Ester TM10097111000.05275-39Hi-Ester TM12012011.89850.05268-30Hi-Ester TM14014313.1830.05280-30Hi-Ester TM32030620.2730.05276-9Application Scope and Recommended Dosage★ High-Temperature Chain Oil—Up to 98%                  ★ Engine  Oil—5-15%★ Air Compressor Oil—Up to 98%                                  ★ Industrial Gear Oil—Up to 98%★ High-/Low-Temperature  Grease—10-90%Product Features ★ Excellent high-temperature detergency      ★ High flash point, low volatility ★ Good low-temperature performance        ★ High demulsibility ★ High thermal stability and oxidation stability    ★ Biodegradable

High - viscosity PAO synthetic base oil

  Excellent high - temperature stability

Plant Workshop

factory5
factory4
factory3
factory2
factory

Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%
+
  • 1(1736815191913).jpg
  • 2(1736815192036).jpg

JDAO-535 Thioether and Phenolic Ester Type Antioxidant

JDAO-535 refers to Thioether and Phenolic Ester Type Antioxidant, which is with low toxicity, can used to stabilize polymers and other organic materials which are prone to thermal degradation. This product is widely used in polyolefin, elastomers (EPDM), petroleum products and other applications.


Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%