+
  • 1(1736492793629).jpg
  • 2(1736492793701).jpg

Product Description

Product Introduction

JD4207 is formulated with high-performance composite antioxidant with special anti-wear additives and high-performance rust preventive agents, which has excellent stability and lubricity and can greatly extend the service life of the oil.

The polyethylene glycol gear lubricant formulated with JD4207 has excellent performance, so it is especially suitable for lubrication of gears and bearings under high temperature environment, especially for large steel mills and large presses, as well as bevel gears, spiral bevel gears, helical gears, closed spur gears and worm gears.

Product Characteristics

  • Low odor
  • Good lubricity, long life
  • Good antirust properties
  • Excellent oxidation resistance
  • Excellent resistance to high temperatures

Technical Specification

Item

Typical Data

Active ingredient

100%

Appearance (20℃)

Reddish brown liquid

Density(20℃), g / cm3

0.96

Odor

Small odor

Kinematic viscosity ( 40℃), mm2/s

246

Equivalent products

Mobil

Shell

BASF

KLUBER

Total

BP

Glygoyle

Omala S4 WE

Plurasafe GL WI

Syntheso D EP

Carter sy

Enersyn SG-XP

Recommended Applications of JD4207 Polyethylene Glycol Gear Oil Package

 

150

220

320

460

680

1000

JD4207

2%

2%

2%

2%

2%

2%

PAG

98%

98%

98%

98%

98%

98%

Antifoam

100ppm

100ppm

100ppm

100ppm

100ppm

100ppm

Kinematic viscosity(40℃), mm2 /s

150

220

320

460

680

1000

Kinematic viscosity(100℃), mm2 /s

24

36

52

73

101

145

Viscosity index

192

213

229

242

244

259

Pour point,℃

-45

-45

-42

-39

-36

-30

Rust experiment-distilled water 24h

Pass

Pass

Pass

Pass

Pass

Pass

Copper corrosion

1a

1a

1a

1a

1a

1a

Timken OK load lbs

75

75

75

75

75

75

FZG (A/8.3/90)

>12

>12

>12

>12

>12

>12

FZG (A/16.6/90)

>12

>12

>12

>12

>12

>12

Package / Transportation / Storage

Package: 200L Drum.or IBC Tank. Suitable for container and land transportation.

Avoid direct exposure to sunlight; avoid contact with fire and heat sources; avoid mixing with water; avoid contact with strong oxidizers, strong alkalis, strong acids; open the lid and take out part of the product should be covered in time to prevent contamination of the product in the drum; long-term storage of some products darken the appearance of the product does not affect the effect of its use. If the product is frozen in low temperature, please put it in 20℃ environment and thaw it completely to use without affecting the effect. Avoid contact with eyes and swallowing. In case of contact, rinse off with cold water or seek medical attention immediately.

The final product data may vary slightly from this table due to fine-tuning or normal changes in the formula during production.

There may be a slight difference between the final product data and the table, which is normal.

Related Products

Unsaturated Complex/ Polyolesters

Product IntroductionThis product series comprises esters synthesized from oleic acid and polyols, characterized by excellent lubricity, biodegradability, good annealing cleanliness, outstanding high- and low-temperature performance, high flash point, and high fire point. They can be used either as a standalone base oil or blended with synthetic base oils, and are suitable for applications such as fire-resistant hydraulic fluids and metalworking oils. Technical SpecificationJ&D CodeKV40cstKV100cstVIITANmg KOH/gFP ℃PP ℃Hi-Ester U3046469.2187<1310-45Hi-Ester U30686612181<1320-40Hi-Ester U40686812.761900.2315-25Unsaturated Complex/ PolyolestersApplication scope and recommended dosage★ Fire-resistant Hydraulic Fluids:10–100%★ Metalworking Oils:10–60%Product Characteristics★ Excellent high-temperature detergency★ High flash point, low volatility★ Good low-temperature performance★ Good hydrolytic stability★ High thermal stability and oxidation stability★ BiodegradablePacking and transportationPacked in drums, net weight 190kg per drum.Store and transport as non-dangerous goods, keep in a cool, dry and ventilated place under tight seal.

TMA Ester

 Product IntroductionTrimellitic esters are produced by the reaction of trimellitic anhydride with monohydric or polyhydric alcohols. Characterized by a high flash point and low volatility, they are ideally suited for high-temperature applications, serving as base oils for high-temperature chain oils, air compressor oils, and high/low-temperature greases. Compatible with both PAO and high-quality mineral oils, they can also be utilized as base oils for various fully synthetic or semi-synthetic lubricants.Technical SpecificatioTMA Ester J&D CodeKV40 cstKV100 cstVIITAN mg KOH/gFlash Point ℃Pour Point℃Hi-Ester TM505281240.05282-45Hi-Ester TM10097111000.05275-39Hi-Ester TM12012011.89850.05268-30Hi-Ester TM14014313.1830.05280-30Hi-Ester TM32030620.2730.05276-9Application Scope and Recommended Dosage★ High-Temperature Chain Oil—Up to 98%                  ★ Engine  Oil—5-15%★ Air Compressor Oil—Up to 98%                                  ★ Industrial Gear Oil—Up to 98%★ High-/Low-Temperature  Grease—10-90%Product Features ★ Excellent high-temperature detergency      ★ High flash point, low volatility ★ Good low-temperature performance        ★ High demulsibility ★ High thermal stability and oxidation stability    ★ Biodegradable

High - viscosity PAO synthetic base oil

  Excellent high - temperature stability

Plant Workshop

factory5
factory4
factory3
factory2
factory

Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%
+
  • 1(1736492793629).jpg
  • 2(1736492793701).jpg

JD4207 Polyethylene Glycol Gear Oil Package

JD4207 is formulated with high-performance composite antioxidant with special anti-wear additives and high-performance rust preventive agents, which has excellent stability and lubricity and can greatly extend the service life of the oil.


Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%