+
  • 1(1736493429257).jpg
  • 2(1736493429269).jpg

Product Description

Product Advantages

Through the Southwest Research Institute bench experiment; Low odor, environmental, and more reasonable formula with high economy; Good oil solubility, and it applies to APIⅠ, Ⅱ,Ⅲ and PAO; Excellent load bearing, anti-scuffing, detergency and antioxidant properties; Outstanding anti-foam and anti-corrosive performance.

Product Introduction

General gear oil additive package JD4218A is a newly-developed eco-friendly product with low odor. With 80W/90 viscosity grade, the vehicle gear oil prepared on a basis of 3.8% additive dose has passed bench tests such as CRC L-42, CRC L-33- 1, CRC L-37- 1and CRC L-60- 1, etc., showing a quality higher than GL-5.

Recommended Dosage

JD4218A could blend the vehicle gear oils of API GL-5 grade with following viscosity grades: SAE 90、80W/90、85W/90、85W/140. JD4218A could blend the industrial gear oils of following viscosity grades:N68 、N100 、N150 、N220、 N320 、N460.

Performance level

Recommended Dosage(m%)

GL-5

3.5

GL-4

1.75

Heavy load

1.5

Medium load

1.0

Technical Specification 

Item

Quality Index

Typical Value

Test Method

Kinematic viscosity (40℃),mm2/s

Report

7.26

GB/T 265

Density (20℃),g/cm3

0.9- 1. 1

0.8550

GB/T 1884

Element content ,m%

Sulphur

≥30

32.78

SH/T 0303

Phosphor

≥1.5

1.62

SH/T 0296

Nitrogen

≥0.5

0.82

SH/T 1884

 

Package/Product Storage/Transportation

Net weight: 200kg/drum.

The maximum temperature should not exceed 70 ℃ during storage, loading and unloading and oil blending, and not exceed 45 ℃ for long term storage. This product is non flammable, non explosive and non-corrosive.No special preventative measure is required during use, but general preventive measures in handling of chemicals shall be followed. If the oil splashes onto skin, detergent, soap and water can be used to wash it away thorough.

Related Products

High - viscosity PAO synthetic base oil

  Excellent high - temperature stability

Ultra-high viscosity PAO synthetic base oil

Excellent lubricity. Good thermal oxidation stability.

PAG water-soluble polyether

Reverse solubility, with the cloud point of its aqueous solution being approximately 50℃.

Water-insoluble PAG polyether

Insoluble in water but partially soluble in hydrocarbons.

Plant Workshop

factory5
factory4
factory3
factory2
factory

Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%
+
  • 1(1736493429257).jpg
  • 2(1736493429269).jpg

JD4218A General Gear Oil Additive Package

Through the Southwest Research Institute bench experiment; Low odor, environmental, and more reasonable formula with high economy; Good oil solubility, and it applies to APIⅠ, Ⅱ,Ⅲ and PAO; Excellent load bearing, anti-scuffing, detergency and antioxidant properties; Outstanding anti-foam and anti-corrosive performance.


Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%