Welcome to Henan J&D Chemical Co.,Ltd.
Product Description
JD5087 is a package used for the formulation of water-glycol flame resistant hydraulic fluids.
Product Characteristics
- JD5087 does not contain water-based viscosity builder, must add additional water-based viscosity builder, in order to formulate a variety of viscosity of water - glycol flame retardant hydraulic fluid.
- JD5087 contains sufficient liquid-phase antirust agent and gas-phase antirust agent, which can protect the equipment from rusting for a long time.
- The water-glycol flame retardant hydraulic fluid formulated with JD5087 has superior viscosity and temperature characteristics, good chemical stability, will not be delaminated under normal use and maintenance, will not deteriorate, long service life.
- The water-glycol flame retardant hydraulic fluid formulated with JD5087 has high viscosity index and good lubricity, which makes it approximate to the performance of mineral hydraulic oil, and can withstand higher working pressure.
- None harmful substances, non-toxic, safe to use. The components are easy to biodegrade and treat waste liquid.
Technical Specification
|
Item |
Typical Data |
Test Method |
|
|
Appearance |
Colorless to pale yellow, transparent liquid |
Visual |
|
|
Specific gravity (20℃), g / cm3 |
1.04 - 1.06 |
DIN 51 757 |
|
|
PH Value |
9.3 |
DIN 51 369 |
|
|
Copper corrosion (100 ± 2℃, 1h) |
1a |
ISO 2160 |
|
|
36% Deionized water + 45.5% ethylene glycol + 15% w 55000 + 3.5% JD5087 (For reference only) |
Specific gravity (20℃) g / cm3 |
1.07 - 1.09 |
DIN 51 757 |
|
Motor viscosity (40℃), cst |
46 ± 4.6 |
DIN 51 562 |
|
|
Viscosity index |
> 170 |
ISO 2909 |
|
|
PH price |
> 9.2 |
DIN 51 369 |
|
|
Dipping point, (- 40℃) |
Qualified |
ISO 3016 |
|
|
Copper corrosion (100 ± 2℃, 1h) |
1a |
ISO 2160 |
|
|
Ground inding diameter (294n, 1200r, 30min, room temperature), mm |
Measured test (about 0.66) |
SH/T 0189 |
|
Recommended Dosage
Additive ratio for the formulation of water-glycol flame retardant hydraulic fluids with a viscosity # 46 and low temperature resistance of ≤ -40℃:
|
Item |
Recommended Dosage |
|
DI water |
35 -40 % |
|
Ethylene glycol (or diethylene glycol) |
36 - 45.5% |
|
Water-based adhesive |
10 - 20% |
|
JD 5087 |
3.5 - 3.6% |
|
Direct acid-resistant bright red dye |
0.005% |
Note 1: Due to the difference in quality and low temperature resistance requirements of polyol and viscosity index improver, the above ratio is for reference only.
Note 2: The water used to formulate water-glycol flame retardant hydraulic fluid with this product must be deionized water or higher grade water.
Operating Instructions
1. This product should be kept in airtight condition, avoiding contact with any other substances, preventing cross-contamination, and the equipment for producing flame-retardant hydraulic fluid should be specialized as much as possible.
2. The production process when producing water - ethylene glycol flame retardant hydraulic fluid:
- Add the required amount of polyalcohol (ethylene glycol or diethylene glycol) into the reactor, add viscosity increasing agent (JD55000) while stirring, and stir well.
- Add deionized water (minus the amount of water used to dissolve the dye) and JD5087, stir well.
- Add the aqueous solution of dye and mix well.
Note: The dye should be fully dissolved and filtered with a small amount of deionized water before pouring into the reactor, and note that the amount of water used to dissolve the dye should also be counted in the total water consumption.
Discharge.
Note: The finished product must be filtered with high-precision filtration facilities as far as possible according to the conditions of the equipment. For example, some big brand companies in the industry use 0.5 micron to 25 micron filtration facilities.
Package / Transportation / Storage
Best-before date: 12 months of cool, ventilated, light-proof, airtight storage.
Package: 200L Drum.or IBC Tank. Suitable for container and land transportation.
Related Products
High - viscosity PAO synthetic base oil
Ultra-high viscosity PAO synthetic base oil
Plant Workshop
Get A Quote
* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible
JD5087 Water-Glycol Non-Flammable Hydraulic Fluid Package
Classification：
Contact Us
Room 509, 5th Floor, Xulong Building, Northeast corner of Jingkai Road and Shengli Road, Hualong District, Puyang City, Henan Province
Follow Us:
