+
  • 2(1736493065628).jpg
  • 1(1736493065736).jpg

Product Description

Product Introduction

JD5088 is specially designed for unsaturated ester flame-resistant hydraulic fluids, which contains special kinds of antioxidants to solve the problem that unsaturated esters are easy to oxidize and deteriorate. By selecting various kinds of high-quality additives, its synergistic effect and compatibility are fully utilized. The oils mixed with this agent can reach the standard of imported similar products. Adding 2.6% of JD5088 into TMPTO base oil, the product has excellent antioxidant performance and rust and corrosion prevention performance.

Recommended Dosage

Product

Recommended Dosage (W%)

JD5088

2.6

Technical Specification

Item

Typical Data

Test Method

Appearance(25℃)

Light yellow liquid

Visual

Kinematic Viscosity ( 40℃), mm2/s

80-160

GB/T265

Flash Point (Open) /℃

>180

GB/T3536

Mechanical impurities

-

GB/T511

Water %

-

GB/T260

Package / Transportation / Storage

Package: 200L Drum.or IBC Tank. Suitable for container and land transportation.

Refer to SH/T0164 for storage, loading, unloading and oil adjustment. The maximum temperature should not exceed 75℃. For long-term storage, the maximum temperature should not exceed 45℃. This product is non-flammable, non-explosive, non-corrosive, in terms of safety, environmental protection, use and other aspects of general petroleum products, without special protection.

 

JD5088 Performance Test for Unsaturated Ester Applications

Product Introduction

JD5088 is an unsaturated ester based flame resistant hydraulic fluid designed to improve rotary oxygen elasticity while requiring a lighter color and slower discoloration. Adding 2.6% of JD5088 to TMPTO base oils, the product has excellent performance indicators.

Test Formulation

Product

Recommended Dosage (W%)

JD5088

2.6

TMPTO

97.4

Test Data

Test Item

Method

Unit

Test Result

Kinematic viscosity (40℃)

ASTM D445

cSt

46

Viscosity index

ASTM D2270

-

>200

Flash point (opening)

ASTM D92

270

Pour point

ASTM D97

-28

Rotary oxygen bomb

ASTM D2272

Minute

>120

Dry TOST, oxidation test

ASTM D943

Hour

>800

Rust experiment

ASTM D665B

-

Pass through

Four ball wear test

ASTM D2783

Cm

<0.40

FZG

ASTM D5182

Failure level

>12

The test results of all the above performance indexes are excellent.

JD5088 is used in unsaturated ester TMTPO and has excellent oxidation stability, rust resistance and wear resistance.

Related Products

Unsaturated Complex/ Polyolesters

Product IntroductionThis product series comprises esters synthesized from oleic acid and polyols, characterized by excellent lubricity, biodegradability, good annealing cleanliness, outstanding high- and low-temperature performance, high flash point, and high fire point. They can be used either as a standalone base oil or blended with synthetic base oils, and are suitable for applications such as fire-resistant hydraulic fluids and metalworking oils. Technical SpecificationJ&D CodeKV40cstKV100cstVIITANmg KOH/gFP ℃PP ℃Hi-Ester U3046469.2187<1310-45Hi-Ester U30686612181<1320-40Hi-Ester U40686812.761900.2315-25Unsaturated Complex/ PolyolestersApplication scope and recommended dosage★ Fire-resistant Hydraulic Fluids:10–100%★ Metalworking Oils:10–60%Product Characteristics★ Excellent high-temperature detergency★ High flash point, low volatility★ Good low-temperature performance★ Good hydrolytic stability★ High thermal stability and oxidation stability★ BiodegradablePacking and transportationPacked in drums, net weight 190kg per drum.Store and transport as non-dangerous goods, keep in a cool, dry and ventilated place under tight seal.

TMA Ester

 Product IntroductionTrimellitic esters are produced by the reaction of trimellitic anhydride with monohydric or polyhydric alcohols. Characterized by a high flash point and low volatility, they are ideally suited for high-temperature applications, serving as base oils for high-temperature chain oils, air compressor oils, and high/low-temperature greases. Compatible with both PAO and high-quality mineral oils, they can also be utilized as base oils for various fully synthetic or semi-synthetic lubricants.Technical SpecificatioTMA Ester J&D CodeKV40 cstKV100 cstVIITAN mg KOH/gFlash Point ℃Pour Point℃Hi-Ester TM505281240.05282-45Hi-Ester TM10097111000.05275-39Hi-Ester TM12012011.89850.05268-30Hi-Ester TM14014313.1830.05280-30Hi-Ester TM32030620.2730.05276-9Application Scope and Recommended Dosage★ High-Temperature Chain Oil—Up to 98%                  ★ Engine  Oil—5-15%★ Air Compressor Oil—Up to 98%                                  ★ Industrial Gear Oil—Up to 98%★ High-/Low-Temperature  Grease—10-90%Product Features ★ Excellent high-temperature detergency      ★ High flash point, low volatility ★ Good low-temperature performance        ★ High demulsibility ★ High thermal stability and oxidation stability    ★ Biodegradable

High - viscosity PAO synthetic base oil

  Excellent high - temperature stability

Plant Workshop

factory5
factory4
factory3
factory2
factory

Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%
+
  • 2(1736493065628).jpg
  • 1(1736493065736).jpg

JD5088 Unsaturated Ester Flame Retardant Hydraulic Fluid Package

JD5088 is specially designed for unsaturated ester flame-resistant hydraulic fluids, which contains special kinds of antioxidants to solve the problem that unsaturated esters are easy to oxidize and deteriorate.


Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%